Saturday, May 30, 2020

2010 Lexus Truck RX 350 AWD V6-3.5L (2GR-FE) B CODE Page 810


(b) Disconnect the cable from the negative (-) battery terminal.



NOTICE:



Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.



(c) Measure the resistance according to the value(s) in the table below.



Standard Resistance:



Text in Illustration



NG -- REPLACE NO. 2 FLOOR WIRE



OK -- Continue to next step.



19. CHECK SIDE AIRBAG SENSOR LH



(a) Connect the connector to the rear airbag sensor LH.



(b) Interchange the side airbag sensor RH with LH and connect the connectors to them.



(c) Connect the cable to the negative (-) battery terminal.



(d) Turn the engine switch on (IG), and wait for at least 60 seconds.



(e) Clear the DTCs stored in the the memory See: Restraints and Safety Systems/Air Bag Systems/Testing and Inspection/Reading and



Clearing Diagnostic Trouble Codes/DTC Check / Clear.



(f) Turn the engine switch off.



(g) Turn the engine switch on (IG), and wait for at least 60 seconds.



(h) Check for DTCs See: Restraints and Safety Systems/Air Bag Systems/Testing and Inspection/Reading and Clearing Diagnostic



Trouble Codes/DTC Check / Clear.