assembly stops operating when its output exceeds a certain level. When the operation of the stereo component amplifier assembly
stops, the navigation system will not function normally. This is because MOST communication will stop due to the shut down of the
amplifier causing an error in the MOST network. The stereo component amplifier assembly will start operating again when the engine
switch is turned off and back on (ACC) again. However, the amplifier will stop operating again if its output exceeds a certain level.
(for 15 speakers)
* When the stereo component amplifier assembly stops operating and a malfunction occurs in the navigation system due to a
short in a speaker circuit, this DTC will be stored. (for 15 speakers)
HINT
* For the MOST network, the display and navigation module display is the master unit.
* Errors may occur in MOST communication between devices due to problems such as electrical noise.
WIRING DIAGRAM
1. w/o Rear Seat Entertainment System
2. w/ Rear Seat Entertainment System
INSPECTION PROCEDURE
NOTICE:
After replacing the radio receiver assembly of vehicles subscribed to pay-type satellite radio broadcasts, registration of the XM
radio ID is necessary. (w/ SDARS System)
No comments:
Post a Comment