2010 Lexus Truck RX 350 AWD V6-3.5L (2GR-FE) P Code Charts Page 1417

Terms "cold" and "hot" refer to the temperature of the coils. "Cold" means approximately -10 to 50锟斤拷C (14 to 122锟斤拷F). "Hot"

means approximately 50 to 100锟斤拷C (122 to 212锟斤拷F).

(c) Reconnect the crankshaft position sensor connector.

NG -- REPLACE CRANKSHAFT POSITION SENSOR See: Powertrain Management/Computers and Control

Systems/Crankshaft Position Sensor/Service and Repair/Removal

OK -- Continue to next step.

3. CHECK HARNESS AND CONNECTOR (CRANKSHAFT POSITION SENSOR - ECM)

(a) Disconnect the crankshaft position sensor connector.

(b) Disconnect the ECM connector.

(c) Measure the resistance according to the value(s) in the table below.

Standard Resistance (Check for Open):

Standard Resistance (Check for Short):

Text in Illustration

(d) Reconnect the ECM connector.

(e) Reconnect the crankshaft position sensor connector.

NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR (CRANKSHAFT POSITION SENSOR - ECM)

OK -- Continue to next step.

4. CHECK SENSOR INSTALLATION (CRANKSHAFT POSITION SENSOR)

(a) Check the crankshaft position sensor installation condition.

OK:

Sensor is installed correctly.