(b) Connect Techstream to the DLC3.
(c) Turn the engine switch on (IG) and turn the tester on.
(d) Enter the following menus: Chassis / Tire Pressure Monitor / Data List.
(e) Check the values by referring to the table below.
Tire Pressure Monitor
HINT
* *: It may take about 2 or 3 minutes until the values are displayed.
* When the "ID Tire Inflation Pressure" data has not changed, reset the tire pressure to the appropriate specified value and
rotate the tire 90 to 270锟斤拷. Then rapidly release the tire pressure and recheck the data.
Result:
B -- REPLACE TIRE PRESSURE WARNING ECU
A -- END
Up to 08/2009
SUPPLEMENTAL RESTRAINT SYSTEMS: AIRBAG SYSTEM: B1603/83,B1612/83,B1613/83: Front Satellite Sensor Bus RH
Initialization Incomplete
B1603/83 - Front Satellite Sensor Bus RH Initialization Incomplete
B1612/83 - Lost Communication with Front Airbag Sensor RH
No comments:
Post a Comment