2010 Lexus Truck RX 350 AWD V6-3.5L (2GR-FE) Page 682

NG -- REPLACE FLOOR WIRE

OK -- Continue to next step.

7. CHECK FLOOR WIRE (SHORT TO GROUND)

(a) Turn the engine switch off.

(b) Disconnect the cable from the negative (-) battery terminal.

NOTICE:

Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

(c) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Text in Illustration

NG -- REPLACE FLOOR WIRE

OK -- Continue to next step.

8. CHECK FLOOR WIRE (OPEN)

(a) Using SST, connect terminals 2 (BCR+) and 1 (BCR-) of connector C.

NOTICE:

Do not forcibly insert SST into the terminals of the connector when connecting.

SST : 09843-18040

(b) Measure the resistance according to the value(s) in the table below.