rotate the tire 90 to 270锟斤拷. Then rapidly release the tire pressure and recheck the data.
Result:
B -- REPLACE TIRE PRESSURE WARNING ECU
A -- END
From 08/2009
TIRE PRESSURE MONITORING: TIRE PRESSURE WARNING SYSTEM: C2126/26: Transmitter ID not Received in Main Mode
C2126/26 - Transmitter ID not Received in Main Mode
DESCRIPTION
If the tire pressure warning ECU does not receive radio waves from the transmitters after all IDs are registered, DTC C2126/26 is set in the tire
pressure warning ECU and the tire pressure warning light blinks for 1 minute and then remains on.
When the tire pressure warning ECU successfully receives radio waves from all the transmitters whose IDs are stored in the ECU, DTC C2126/26
will be deleted and the tire pressure warning light will go off.
HINT
If the IDs stored in the tire pressure warning ECU differ from the transmitter IDs, DTC C2126/26 will be set. Check that the IDs
in the ECU are the same as the transmitter IDs.
No comments:
Post a Comment