2010 Lexus Truck RX 350 AWD V6-3.5L (2GR-FE) Page 257

* It takes about 2 or 3 minutes to display the updated tire pressure data.

* When the "ID Tire Inflation Pressure" data has not changed, reset the tire pressure to the appropriate specified value and

rotate the tire 90 to 270锟斤拷. Then rapidly release the tire pressure and recheck the data.

* Record the "ID Tire Inflation Pressure" data transmitter ID that corresponds to each tire.

(i) After confirming that the "ID Tire Inflation Pressure" data for one tire (ID1 to ID5) has changed, repeat this procedure one by one.

Identify the transmitter not received.

Result:

B -- END

A -- Continue to next step.

2. CHECK TRANSMITTER ID

(a) Turn the engine switch off.

(b) Connect Techstream to the DLC3.

(c) Turn the engine switch on (IG) and turn the tester on.

(d) Enter the following menus: Chassis / Tire Pressure Monitor / Data List.

(e) Check the values by referring to the table below.

Tire Pressure Monitor

(f) Check the ID number on the identified transmitter by removing it from the tire and wheel.

(g) Confirm that the ID number on the transmitter and recorded transmitter ID match.