(b) Connect the connectors to the rear seat side airbag LH and the center airbag sensor assembly.
(c) Connect the cable to the negative (-) battery terminal.
(d) Turn the engine switch on (IG), and wait for at least 60 seconds.
(e) Clear the DTCs See: Restraints and Safety Systems/Air Bag Systems/Testing and Inspection/Reading and Clearing Diagnostic
Trouble Codes/DTC Check / Clear.
(f) Turn the engine switch off.
(g) Turn the engine switch on (IG), and wait for at least 60 seconds.
(h) Check for DTCs stored in the memory See: Restraints and Safety Systems/Air Bag Systems/Testing and Inspection/Reading and
Clearing Diagnostic Trouble Codes/DTC Check / Clear.
OK:
DTC B1855, B1856, B1857, B1858 or 63 is not output.
Text in Illustration
HINT
Codes other than DTC B1855, B1856, B1857, B1858 and 63 may be output at this time, but they are not related to this check.
NG -- REPLACE CENTER AIRBAG SENSOR ASSEMBLY See: Relays and Modules/Relays and Modules - Restraints and
Safety Systems/Air Bag Control Module/Service and Repair/Removal
OK -- USE SIMULATION METHOD TO CHECK See: Accessories and Optional Equipment/Antitheft and Alarm
Systems/Diagrams/Diagnostic Aids/How To Troubleshoot ECU Controlled Systems/How To Proceed With Troubleshooting
Up to 08/2009
AUDIO / VIDEO: AUDIO AND VISUAL SYSTEM (w/o Navigation System): 63-7D-63-7F: Disc cannot be Played
63-7F - Copyright Protection Error
DESCRIPTION
INSPECTION PROCEDURE
HINT
After the inspection is completed, clear the DTCs.
PROCEDURE
1. CHANGE DISC
(a) Insert a disc with a playable file and check if the disc can be played correctly.
No comments:
Post a Comment