Text in Illustration
NG -- REPLACE RADIO RECEIVER ASSEMBLY See: Accessories and Optional Equipment/Radio, Stereo, and Compact
Disc/Radio/Stereo/Service and Repair/Removal
OK -- Continue to next step.
6. CHECK HARNESS AND CONNECTOR
HINT
For details of the connectors, refer to Terminals of ECU See: Accessories and Optional Equipment/Radio, Stereo, and Compact
Disc/Testing and Inspection/Pinout Values and Diagnostic Parameters/Audio and Visual System (w/o Navigation System).
(a) Referring to the following AVC-LAN wiring diagram, check the AVC-LAN circuit between the radio receiver assembly and the
component which has stored this code.
(1) Disconnect all connectors between the radio receiver assembly and component which has stored this code.
(2) Check for an open or short in the AVC-LAN circuit between the radio receiver assembly and component which has stored this
code.
OK:
There is no open or short circuit.
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- Continue to next step.
7. REPLACE COMPONENT WHICH HAS STORED THIS CODE
(a) Replace the component which has stored this code with a known good one.
NEXT -- Continue to next step.
8. CLEAR DTC
(a) Clear the DTCs See: Accessories and Optional Equipment/Radio, Stereo, and Compact Disc/Testing and Inspection/Reading and
Clearing Diagnostic Trouble Codes/Audio and Visual System (w/o Navigation System).
No comments:
Post a Comment