2010 Lexus Truck RX 350 AWD V6-3.5L (2GR-FE) C CODE Page 113

WIRING DIAGRAM

INSPECTION PROCEDURE

NOTICE:

When replacing the brake actuator assembly, perform zero point calibration and store system information See: Brakes and

Traction Control/Antilock Brakes / Traction Control Systems/Testing and Inspection/Programming and Relearning.

HINT

When DTC C1241 and/or C1417 is output together with DTC C0278 and/or C0279, inspect and repair the trouble areas indicated

by DTC C1241 and/or C1417 first See: C1241, or See: C1417).

PROCEDURE

1. INSPECT ABS NO.2 FUSE

(a) Remove the ABS NO. 2 fuse from the engine room relay block.

(b) Check if the fusible link is melted.

OK:

The fusible link is not melted.

(c) Measure the resistance according to the value(s) in the table below.