(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
HINT
If troubleshooting has been carried out according to Problem Symptoms Table, refer back to the table and proceed to the next
step See: Brakes and Traction Control/Antilock Brakes / Traction Control Systems/Testing and Inspection/Symptom Related
Diagnostic Procedures/Problem Symptoms Table.
Text in Illustration
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR (GROUND CIRCUIT)
OK -- REPLACE SPIRAL CABLE (STEERING ANGLE SENSOR) See: Brakes and Traction Control/Antilock Brakes /
Traction Control Systems/Steering Angle Sensor/Service and Repair/Removal
From 08/2009
BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: VEHICLE STABILITY CONTROL SYSTEM: C1434: Steering Angle Sensor
Output Malfunction
C1434 - Steering Angle Sensor Output Malfunction
DESCRIPTION
Steering angle sensor signals are sent to the skid control ECU via the CAN communication system. When there is a malfunction in the CAN
communication system, it will be detected by the steering angle sensor zero point malfunction diagnostic function.
No comments:
Post a Comment