Text in Illustration
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- Continue to next step.
2. CHECK TIRE PRESSURE WARNING ECU
(a) Reconnect the F53 ECU connector.
(b) Turn the engine switch on (IG).
(c) Measure the voltage according to the value(s) in the table below.
Standard voltage:
Text in Illustration
NG -- REPLACE TIRE PRESSURE WARNING ECU
OK -- REPLACE TIRE PRESSURE WARNING ANTENNA AND RECEIVER See: Instrument Panel, Gauges and Warning
Indicators/Tire Monitoring System/Tire Pressure Monitor Receiver / Transponder/Service and Repair/Removal
Up to 08/2009
TIRE PRESSURE MONITORING: TIRE PRESSURE WARNING SYSTEM: C2177/77: Initialization not Completed
C2177/77 - Initialization not Completed
DESCRIPTION
Initialization is necessary after replacing any of the tire pressure warning ECU, tires with different tire pressure, or tire pressure warning valve and
transmitters, after rotating the tires or when a new vehicle is delivered.
No comments:
Post a Comment