HINT
* "P440" set by the stereo component amplifier assembly shown in the preceding illustration as an example.
* For details of the DTC display, refer to DTC Check/Clear See: Accessories and Optional Equipment/Radio, Stereo, and
Compact Disc/Testing and Inspection/Reading and Clearing Diagnostic Trouble Codes/Audio and Visual System (w/o
Navigation System).
NEXT -- Continue to next step.
3. CHECK COMPONENT SHOWN BY SUB-CODE
(a) Select the component shown by the sub-code.
HINT
The satellite radio tuner is built into the radio receiver assembly. If there is a problem between the satellite radio tuner and radio
receiver assembly, replace the radio receiver assembly.
Component Table
B -- REPLACE RADIO RECEIVER ASSEMBLY See: Accessories and Optional Equipment/Radio, Stereo, and Compact
Disc/Radio/Stereo/Service and Repair/Removal
A -- Continue to next step.
4. CHECK POWER SOURCE CIRCUIT OF COMPONENT WHICH HAS STORED THIS CODE
(a) Inspect the power source circuit of the component which has stored this code.
If the power source circuit is operating normally, proceed to the next step.
Component Table
NEXT -- Continue to next step.
5. INSPECT RADIO RECEIVER ASSEMBLY
(a) Disconnect the radio receiver assembly connectors.
No comments:
Post a Comment