Text in Illustration
NG -- REPLACE BRAKE ACTUATOR ASSEMBLY See: Brakes and Traction Control/Antilock Brakes / Traction Control
Systems/Hydraulic Control Assembly - Antilock Brakes/Service and Repair/Removal
OK -- Continue to next step.
12. PERFORM TEST MODE (SIGNAL CHECK)
(a) Turn the engine switch off.
(b) Perform the sensor check in the Test Mode procedure See: Brakes and Traction Control/Antilock Brakes / Traction Control
Systems/Testing and Inspection/Initial Inspection and Diagnostic Overview/Test Mode Procedure.
OK:
All Test Mode DTCs are cleared.
Result:
C -- REPLACE REAR SPEED SENSOR
B -- REPLACE REAR SPEED SENSOR AND REAR SPEED SENSOR ROTOR
A -- CHECK FOR INTERMITTENT PROBLEMS See: Accessories and Optional Equipment/Antitheft and Alarm
Systems/Diagrams/Diagnostic Aids/How To Troubleshoot ECU Controlled Systems/How To Proceed With Troubleshooting
13. REPLACE REAR SPEED SENSOR AND REAR SPEED SENSOR ROTOR
(a) Turn the engine switch off.
(b) Replace the rear speed sensor and the rear axle hub and bearing assembly (rear speed sensor rotor) See: Brakes and Traction
Control/Antilock Brakes / Traction Control Systems/Wheel Speed Sensor/Service and Repair/Rear Speed Sensor/Removal.
HINT
The rear speed sensor rotor is incorporated into the rear axle hub and bearing assembly.
If the rear speed sensor rotor needs to be replaced, replace it together with the rear axle hub and bearing assembly with rear
speed sensor.
NOTICE:
Check the speed sensor signal after replacement See: Brakes and Traction Control/Antilock Brakes / Traction Control
Systems/Testing and Inspection/Initial Inspection and Diagnostic Overview/Test Mode Procedure.
NEXT -- Continue to next step.
14. PERFORM TEST MODE (SIGNAL CHECK)
(a) Perform the sensor check in the Test Mode procedure See: Brakes and Traction Control/Antilock Brakes / Traction Control
Systems/Testing and Inspection/Initial Inspection and Diagnostic Overview/Test Mode Procedure.
OK:
All Test Mode DTCs are cleared.
No comments:
Post a Comment