Standard Resistance:
(c) Reconnect the driving support ECU and millimeter wave radar sensor connectors.
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- Continue to next step.
2. CHECK HARNESS AND CONNECTOR (MILLIMETER WAVE RADAR SENSOR POWER SOURCE CIRCUIT)
(a) Disconnect the millimeter wave radar sensor connector.
(b) Turn the engine switch on (IG).
(c) Measure the voltage according to the value(s) in the table below.
Standard Voltage:
Text in Illustration
(d) Reconnect the millimeter wave radar sensor connector.
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- Continue to next step.
3. CHECK HARNESS AND CONNECTOR (MILLIMETER WAVE RADAR SENSOR - BODY GROUND)
(a) Disconnect the millimeter wave radar sensor connector.
Text in Illustration
(b) Measure the resistance according to the value(s) in the table below.
No comments:
Post a Comment