corresponding sensor.
INSPECTION PROCEDURE
PROCEDURE
1. CHECK FOR DTC
(a) Check for DTCs See: Transmission and Drivetrain/Transfer Case/Testing and Inspection/Reading and Clearing Diagnostic Trouble
Codes.
(b) Record the output DTCs (4WD control system).
HINT
When DTCs indicating a CAN communication system malfunction are output, repair the CAN communication system before
repairing each corresponding sensor.
NEXT -- GO TO CAN COMMUNICATION SYSTEM See: Diagnostic Trouble Code Descriptions/CAN Communication System
Up to 08/2009
PARK ASSIST / MONITORING: PARKING ASSIST MONITOR SYSTEM: U0073,U0100,U0126,U0129,U0140: Control Module
Communication Bus Off
U0140 - Lost Communication with Main Body ECU
DESCRIPTION
These DTCs are stored if there is a malfunction in the CAN communication system connected to the parking assist ECU.
HINT
If CAN communication system DTCs are stored, they may also be stored in other systems.
INSPECTION PROCEDURE
PROCEDURE
1. CHECK DTC OUTPUT
(a) Clear the DTCs See: Accessories and Optional Equipment/Collision Avoidance and Parking Assist Systems/Testing and
Inspection/Reading and Clearing Diagnostic Trouble Codes/Parking Assist Monitor System.
(b) Check for DTCs See: Accessories and Optional Equipment/Collision Avoidance and Parking Assist Systems/Testing and
Inspection/Reading and Clearing Diagnostic Trouble Codes/Parking Assist Monitor System.
No comments:
Post a Comment