2010 Lexus Truck RX 350 AWD V6-3.5L (2GR-FE) U CODE Page 345

NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR (DRIVING SUPPORT ECU - MILLIMETER WAVE RADAR

SENSOR)

OK -- Continue to next step.

2. CHECK MILLIMETER WAVE RADAR SENSOR (IGB VOLTAGE)

(a) Disconnect the millimeter wave radar sensor connector.

(b) Turn the engine switch on (IG).

(c) Measure the voltage according to the value(s) in the table below.

Standard Voltage:

Text in Illustration

(d) Reconnect the millimeter wave radar sensor connector.

NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR (IGB CIRCUIT)

OK -- Continue to next step.

3. CHECK MILLIMETER WAVE RADAR SENSOR (SGND CIRCUIT)

(a) Disconnect the millimeter wave radar sensor connector.

(b) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Text in Illustration

(c) Reconnect the millimeter wave radar sensor connector.

NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR (SGND CIRCUIT)