B -- GO TO CAN COMMUNICATION SYSTEM See: Powertrain Management/Computers and Control Systems/Information
Bus/Testing and Inspection/Initial Inspection and Diagnostic Overview/CAN Communication System/How to Proceed With
Troubleshooting
A -- Continue to next step.
3. CHECK DTC OUTPUT (C168D)
(a) Clear the DTCs See: Accessories and Optional Equipment/Collision Avoidance and Parking Assist Systems/Testing and
Inspection/Reading and Clearing Diagnostic Trouble Codes/Parking Assist Monitor System.
(b) Check for DTCs See: Accessories and Optional Equipment/Collision Avoidance and Parking Assist Systems/Testing and
Inspection/Reading and Clearing Diagnostic Trouble Codes/Parking Assist Monitor System.
Result:
HINT
If DTC U0101 is still output after performing the procedure to troubleshoot DTC C168D, replace the parking assist ECU.
C -- GO TO REAR VIEW MONITOR SYSTEM (W/ SIDE MONITOR SYSTEM)
B -- GO TO PARKING ASSIST MONITOR SYSTEM
A -- GO TO CAN COMMUNICATION SYSTEM See: Powertrain Management/Computers and Control Systems/Information
Bus/Testing and Inspection/Initial Inspection and Diagnostic Overview/CAN Communication System/How to Proceed With
Troubleshooting
From 08/2009
PARK ASSIST / MONITORING: INTUITIVE PARKING ASSIST SYSTEM: U0101: Lost Communication with TCM
U0101 - Lost Communication with TCM
DESCRIPTION
This DTC is stored when the clearance warning ECU*1 or parking assist ECU*2 can not receive and recognize several signals via the CAN
communication system.
* *1: w/o Side Monitor System
* *2: w/ Side Monitor System
HINT
When 2 or more DTCs starting with "U" are output simultaneously, inspect the connectors and wire harness of each ECU.
INSPECTION PROCEDURE
PROCEDURE
1. CHECK DTC OUTPUT (U0101)
(a) Clear the DTCs See: Accessories and Optional Equipment/Collision Avoidance and Parking Assist Systems/Testing and
Inspection/Reading and Clearing Diagnostic Trouble Codes/Intuitive Parking Assist System.
No comments:
Post a Comment