2010 Lexus Truck RX 350 AWD V6-3.5L (2GR-FE) U CODE Page 316

HINT

* The connectors connected to the CAN junction connector can be distinguished by the colors of the bus wire.

* Reconnecting the connectors to non-specified positions on the CAN junction connector does not affect system operation.

Result:

B -- CHECK FOR CAN MS BUS BRANCH WIRE

A -- REPLACE CAN NO. 6 JUNCTION CONNECTOR

16. CHECK FOR CAN MS BUS BRANCH WIRE

(a) Reconnect the connector for the bus wire that is shorted to +B or GND to the CAN junction connector (the connector that caused the

bus wire resistance to change to 6 kOhms or higher (for +B short) or 200 Ohms or higher (for ground short) when it was disconnected).

(b) Disconnect the connector that includes terminals CANH and CANL from the ECU to which the bus wire shorted to +B or GND is

connected.

(c) Measure the resistance according to the value(s) in the table below.