2010 Lexus Truck RX 350 AWD V6-3.5L (2GR-FE) C CODE Page 538

These DTCs are also output when calibration has not been completed.

WIRING DIAGRAM

INSPECTION PROCEDURE

NOTICE:

When replacing the yaw rate and acceleration sensor, perform zero point calibration See: Brakes and Traction Control/Antilock

Brakes / Traction Control Systems/Testing and Inspection/Programming and Relearning.

HINT

When DTC U0123, U0124 and/or U0126 is output together with DTC C1436, inspect and repair the trouble areas indicated by

DTC U0123, U0124 and/or U0126 first See: U Code Charts/U0073.

PROCEDURE

1. READ VALUE USING TECHSTREAM (YAW RATE AND ACCELERATION SENSOR)

(a) Connect the Techstream to the DLC3.

(b) Turn the engine switch on (IG).

(c) Select the Data List on the Techstream See: Brakes and Traction Control/Antilock Brakes / Traction Control Systems/Testing and

Inspection/Scan Tool Testing and Procedures/Data List / Active Test.

ABS/VSC/TRAC

(d) Check that the yaw rate and acceleration sensor output value displayed on the Techstream.