(c) Turn the Techstream on.
(d) Enter the following menus: Powertrain / Radar Cruise / Data List.
(e) Check the Data List for proper functioning of the stop light switch.
Radar Cruise
OK:
Display changes according to brake pedal operation described in above table.
NG -- CHECK HARNESS AND CONNECTOR (STOP LIGHT SWITCH ASSEMBLY - POWER SOURCE CIRCUIT)
OK -- Continue to next step.
2. CHECK HARNESS AND CONNECTOR (STOP LIGHT CONTROL RELAY - STOP FUSE)
(a) Disconnect the stop light control relay.
(b) Measure the voltage according to the value(s) in the table below.
Standard Voltage:
(c) Reconnect the stop light control relay.
Text in Illustration
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR (STOP LIGHT CONTROL RELAY - STOP FUSE)
OK -- Continue to next step.
3. CHECK HARNESS AND CONNECTOR (STOP LIGHT CONTROL RELAY - BODY GROUND)
(a) Disconnect the stop light control relay.
(b) Measure the resistance according to the value(s) in the table below.
No comments:
Post a Comment