(e) Read the DTCs.
Result:
HINT
If any DTCs other than P2119 are output, troubleshoot those DTCs first.
B -- GO TO DTC CHART See: Diagnostic Trouble Code Descriptions/SFI System
A -- Continue to next step.
2. INSPECT THROTTLE WITH MOTOR BODY ASSEMBLY (RESISTANCE OF THROTTLE ACTUATOR)
(a) Disconnect the throttle with motor body assembly connector.
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Text in Illustration
(c) Reconnect the throttle with motor body assembly connector.
NG -- REPLACE THROTTLE WITH MOTOR BODY ASSEMBLY See: Powertrain Management/Fuel Delivery and Air
Induction/Throttle Body/Service and Repair/Removal
OK -- Continue to next step.
3. REPLACE ECM
(a) Replace the ECM See: Powertrain Management/Computers and Control Systems/Engine Control Module/Service and
Repair/Removal.
NEXT -- Continue to next step.
4. CHECK WHETHER DTC OUTPUT RECURS (DTC P2119)
(a) Connect the Techstream to the DLC3.
(b) Turn the engine switch on (IG).
(c) Turn the Techstream on.
(d) Clear the DTCs See: Powertrain Management/Computers and Control Systems/Testing and Inspection/Reading and Clearing
Diagnostic Trouble Codes/DTC Check / Clear.
(e) Allow the engine to idle for 15 seconds or more.
(f) Fully depress and release the accelerator pedal several times quickly.
No comments:
Post a Comment