Text in Illustration
HINT
It is only necessary to perform the inspection in the above table for the result (short circuit) that was obtained in the Check CAN
Bus Wire inspection.
Find the necessary inspection from the Purpose column that matches the result in the Result column from the Check CAN Bus
Wire inspection.
NG -- REPAIR OR REPLACE CAN NO. 2 BUS BRANCH WIRE OR CONNECTOR (CAN NO. 4 J/C - PARKING ASSIST
ECU)
OK -- REPLACE PARKING ASSIST ECU See: Accessories and Optional Equipment/Collision Avoidance and Parking Assist
Systems/Parking Assist Control Module/Service and Repair/Parking Assist ECU/Removal
33. CHECK FOR SHORT IN CAN NO. 2 BUS WIRE (CLEARANCE WARNING ECU)
(a) Disconnect the clearance warning ECU connector.
(b) Measure the resistance according to the value(s) in the table below.
No comments:
Post a Comment