Diagnostic Trouble Code Descriptions/Vehicle Stability Control System
B -- REPAIR CIRCUIT INDICATOR OUTPUT CODE (CAN COMMUNICATION SYSTEM) See: Diagnostic Trouble Code
Descriptions/CAN Communication System
A -- Continue to next step.
2. CHECK WIRE HARNESS (STEERING ANGLE SENSOR - BATTERY)
(a) Remove the steering wheel and the column cover lower.
(b) Make sure that there is no looseness at the locking part and the connecting part of the connectors.
(c) Disconnect the steering angle sensor connector.
(d) Measure the voltage according to the value(s) in the table below.
Standard Voltage:
Text in Illustration
NG -- REPAIR OR REPLACE HARNESS AND CONNECTOR
OK -- Continue to next step.
3. CHECK WIRE HARNESS (STEERING ANGLE SENSOR - BODY GROUND)
(a) Turn the engine switch off.
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Text in Illustration
NG -- REPAIR OR REPLACE HARNESS AND CONNECTOR
No comments:
Post a Comment