Text in Illustration
(c) Disconnect the cable from the negative (-) battery terminal.
(d) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Result:
D -- CHECK FOR SHORT IN CAN MS BUS WIRES (TILT AND TELESCOPIC ECU)
C -- CHECK FOR SHORT IN CAN MS BUS WIRES (TILT AND TELESCOPIC ECU)
B -- CHECK FOR OPEN IN CAN BUS MAIN WIRE (TILT AND TELESCOPIC ECU)
A -- REPLACE MULTIPLEX NETWORK BODY ECU (MAIN BODY ECU) See: Power and Ground Distribution/Power
Distribution Module/Service and Repair/Removal
2. CHECK FOR OPEN IN CAN BUS MAIN WIRE (TILT AND TELESCOPIC ECU)
(a) Disconnect the tilt and telescopic ECU connector.
No comments:
Post a Comment