(a) Check if the vehicle is located in an area such as described below:
(1) Facilities or devices that use similar radio frequencies are located in the vicinity of the vehicle.
HINT
If the vehicle is located in an area described above, the tire pressure warning light may turn on only in a particular area due to
interfering radio frequencies.
(2) Devices using similar radio frequencies are used in the vehicle.
OK:
Facilities, or devices that use similar radio frequencies are not located in the vicinity of the vehicle.
HINT
Radio transmission may be interrupted due to the surroundings, or devices installed by the user.
NG -- CHECK IF ANY DEVICE IS INSTALLED BY USER
OK -- Continue to next step.
2. PERFORM INITIALIZATION
(a) Perform initialization See: Instrument Panel, Gauges and Warning Indicators/Tire Monitoring System/Testing and
Inspection/Programming and Relearning/Initialization.
NEXT -- Continue to next step.
3. CONFIRM TIRE INFLATION PRESSURE (DATA LIST)
(a) Turn the engine switch off.
(b) Connect Techstream to the DLC3.
(c) Turn the engine switch on (IG) and turn the tester on.
(d) Enter the following menus: Chassis / Tire Pressure Monitor / Data List.
(e) Check the values by referring to the table below.
No comments:
Post a Comment