HINT
A waterproof connector is used for the side television camera assembly. Therefore, inspect the waveform at the parking assist
ECU with the connector connected.
OK:
Waveform is as shown in the illustration.
HINT
The video waveform changes according to the image sent by the side television camera assembly.
Text in Illustration
NG -- REPLACE SIDE TELEVISION CAMERA ASSEMBLY
OK -- REPLACE PARKING ASSIST ECU See: Accessories and Optional Equipment/Collision Avoidance and Parking Assist
Systems/Parking Assist Control Module/Service and Repair/Parking Assist ECU/Removal
5. REPLACE SIDE TELEVISION CAMERA ASSEMBLY
(a) Replace the side television camera assembly with a new or normally functioning one See: Accessories and Optional
Equipment/Camera/Forward Looking Camera/Service and Repair/Removal.
NEXT -- Continue to next step.
6. CHECK DTC OUTPUT
(a) Clear the DTCs See: Accessories and Optional Equipment/Collision Avoidance and Parking Assist Systems/Testing and
Inspection/Reading and Clearing Diagnostic Trouble Codes/Side Monitor System (w/ Rear View Monitor System).
(b) Check for DTCs See: Accessories and Optional Equipment/Collision Avoidance and Parking Assist Systems/Testing and
Inspection/Reading and Clearing Diagnostic Trouble Codes/Side Monitor System (w/ Rear View Monitor System).
No comments:
Post a Comment