INSPECTION PROCEDURE
PROCEDURE
1. CHECK HARNESS AND CONNECTOR (PARKING ASSIST ECU - OUTER REAR VIEW MIRROR ASSEMBLY)
(a) Disconnect the F55 connector from the parking assist ECU.
(b) Disconnect the I1 connector from the outer rear view mirror assembly RH.
(c) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Text in Illustration
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- Continue to next step.
2. CHECK OUTER REAR VIEW MIRROR ASSEMBLY (SCB+, SGND) See: C1683
NG -- REPLACE PARKING ASSIST ECU See: Accessories and Optional Equipment/Collision Avoidance and Parking Assist
Systems/Parking Assist Control Module/Service and Repair/Parking Assist ECU/Removal
OK -- Continue to next step.
3. REPLACE SIDE TELEVISION CAMERA ASSEMBLY
(a) Replace the side television camera assembly with a new or normally functioning one See: Accessories and Optional
Equipment/Camera/Forward Looking Camera/Service and Repair/Removal.
NEXT -- Continue to next step.
No comments:
Post a Comment