NOTICE:
When the millimeter wave radar sensor is replaced with a new one, adjustment of the radar sensor beam axis must be performed
See: Accessories and Optional Equipment/Collision Avoidance and Parking Assist Systems/Distance Sensor/Adjustments.
PROCEDURE
1. CHECK HARNESS AND CONNECTOR (DRIVING SUPPORT ECU - MILLIMETER WAVE RADAR SENSOR)
(a) Disconnect the driving support ECU and millimeter wave radar sensor connectors.
Text in Illustration
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
(c) Reconnect the driving support ECU and millimeter wave radar sensor connectors.
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- Continue to next step.
2. CHECK HARNESS AND CONNECTOR (MILLIMETER WAVE RADAR SENSOR - BODY GROUND)
(a) Disconnect the millimeter wave radar sensor connector.
Text in Illustration
(b) Measure the resistance according to the value(s) in the table below.
No comments:
Post a Comment