OK:
DTC B1793 is not output.
HINT
Codes other than DTC B1793 may be output at this time, but they are not related to this check.
NG -- REPLACE FRONT SEAT ASSEMBLY RH
OK -- END
11. REPLACE FRONT SEAT ASSEMBLY RH
(a) Turn the engine switch off.
(b) Disconnect the cable from the negative (-) battery terminal.
(c) Replace the front seat assembly RH See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Front Seat
Assembly/Removal.
NEXT -- Continue to next step.
12. PERFORM ZERO POINT CALIBRATION
(a) Connect the cable to the negative (-) battery terminal.
(b) Connect the Techstream to the DLC3.
(c) Turn the engine switch on (IG).
(d) Using the Techstream, perform Zero Point Calibration See: Restraints and Safety Systems/Testing and Inspection/Programming and
Relearning.
OK:
"Zero Point Calibration is complete." is displayed.
NEXT -- Continue to next step.
13. PERFORM SENSITIVITY CHECK
(a) Using the Techstream, perform Sensitivity Check See: Restraints and Safety Systems/Testing and Inspection/Programming and
Relearning.
Standard:
27 to 33 kg (59.5 to 72.8 lb)
NEXT -- END
From 08/2009
SUPPLEMENTAL RESTRAINT SYSTEMS: OCCUPANT CLASSIFICATION SYSTEM: B1793: Occupant Classification Sensor Power
Supply Circuit Malfunction
B1793 - Occupant Classification Sensor Power Supply Circuit Malfunction
DESCRIPTION
The occupant classification sensor power supply circuit consists of the occupant classification ECU and occupant classification sensors.
DTC B1793 is stored when a malfunction is detected in the occupant classification sensor power supply circuit.
No comments:
Post a Comment