Text in Illustration
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- Continue to next step.
5. CHECK HARNESS AND CONNECTOR (AVC-LAN COMMUNICATION LINE)
(a) Disconnect the parking assist ECU connector.
(b) Disconnect the display and navigation module display connector.
(c) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Text in Illustration
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- Continue to next step.
6. REPLACE PARKING ASSIST ECU
(a) Replace the parking assist ECU See: Accessories and Optional Equipment/Collision Avoidance and Parking Assist Systems/Parking
Assist Control Module/Service and Repair/Parking Assist ECU/Removal.
(b) Clear the DTCs See: Accessories and Optional Equipment/Navigation System/Testing and Inspection/Reading and Clearing
Diagnostic Trouble Codes/Navigation System (for DVD).
(c) Recheck for DTCs and check if the same DTC is output again.
No comments:
Post a Comment