(a) Turn the engine switch off.
(b) Connect the Techstream to the DLC3.
(c) Turn the engine switch on (IG).
(d) Turn the Techstream on.
(e) Check the tilt and telescopic manual switch. Enter the following menus: Body Electrical / Tilt & Telescopic / Data List.
Tilt & Telescopic
OK:
"ON" is displayed on the Techstream screen when each switch is turned on.
"OFF" is displayed on the Techstream screen when each switch is turned off.
NG -- CHECK HARNESS AND CONNECTOR (MULTIPLEX TILT AND TELESCOPIC ECU - TILT AND TELESCOPIC
SWITCH)
OK -- Continue to next step.
2. CONFIRM DTC
(a) Clear the DTC See: Steering and Suspension/Steering/Steering Column/Testing and Inspection/Reading and Clearing Diagnostic
Trouble Codes/Power Tilt and Power Telescopic Steering Column System.
(b) Check for DTCs See: Steering and Suspension/Steering/Steering Column/Testing and Inspection/Reading and Clearing Diagnostic
Trouble Codes/Power Tilt and Power Telescopic Steering Column System.
Result
B -- USE SIMULATION METHOD TO CHECK See: Accessories and Optional Equipment/Antitheft and Alarm
Systems/Diagrams/Diagnostic Aids/How To Troubleshoot ECU Controlled Systems/How To Proceed With Troubleshooting
A -- REPLACE MULTIPLEX TILT AND TELESCOPIC ECU
3. CHECK HARNESS AND CONNECTOR (MULTIPLEX TILT AND TELESCOPIC ECU - TILT AND TELESCOPIC SWITCH)
No comments:
Post a Comment