(b) Measure the voltage according to the value(s) in the table below.
Standard Voltage:
Text in Illustration
(c) Reconnect the driving support ECU connector.
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- Continue to next step.
4. CHECK HARNESS AND CONNECTOR (DRIVING SUPPORT ECU - BODY GROUND)
(a) Disconnect the driving support ECU connector.
Text in Illustration
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
(c) Reconnect the driving support ECU connector.
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- Continue to next step.
5. CHECK DRIVING SUPPORT ECU
(a) Measure the voltage according to the value(s) in the table below.
No comments:
Post a Comment