NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- REPLACE POWER WINDOW REGULATOR MOTOR ASSEMBLY (for Rear LH side) See: Body and Frame/Doors,
Hood and Trunk/Doors/Rear Door/Rear Door Window Regulator/Service and Repair/Removal
11. READ VALUE USING TECHSTREAM (RR-Door Motor)
(a) Connect the Techstream to the DLC3.
(b) Turn the engine switch on (IG).
(c) Turn the Techstream on.
(d) Enter the following menus: Body Electrical / RR-Door Motor / Data List.
(e) Read the Data List according to the display on the Techstream.
RR-Door Motor (Power Window Regulator Motor Assembly (for Rear RH Side))
OK:
On the Techstream screen, ON or OFF is displayed accordingly.
NG -- INSPECT POWER WINDOW REGULATOR SWITCH ASSEMBLY (for Rear RH Side)
OK -- REPLACE POWER WINDOW REGULATOR MOTOR ASSEMBLY (for Rear RH side) See: Body and Frame/Doors,
Hood and Trunk/Doors/Rear Door/Rear Door Window Regulator/Service and Repair/Removal
12. INSPECT POWER WINDOW REGULATOR SWITCH ASSEMBLY (for Rear RH Side)
(a) Remove the power window regulator switch assembly (for rear RH side) See: Sensors and Switches/Sensors and Switches -
Windows and Glass/Power Window Switch/Service and Repair/Rear Power Window Switch/Removal.
(b) Measure the resistance according to the value(s) in the table below.
No comments:
Post a Comment