(b) Measure the resistance of the wire harness side connector.
Standard Resistance:
Text in Illustration
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- REPLACE 4WD ECU ASSEMBLY
Up to 08/2009
MF1A TRANSFER / 4WD / AWD: ACTIVE TORQUE CONTROL 4WD SYSTEM: C1299: Cancellation of 4WD Control
C1299 - Cancellation of 4WD Control
DESCRIPTION
- If wheel slip continues, differential control will be disabled when the torque-distribution ratio of the differential clutch exceeds the set value
and a malfunction in the output of the wheel speed sensors, etc. occurs.
- If a difference in diameter between the front and rear wheels is determined, differential control will be disabled.
INSPECTION PROCEDURE
HINT
Check the condition of each related circuit connector before troubleshooting See: Accessories and Optional Equipment/Antitheft
and Alarm Systems/Diagrams/Diagnostic Aids/How To Troubleshoot ECU Controlled Systems/Electronic Circuit Inspection
Procedure.
PROCEDURE
1. CHECK TIRE CONDITION
(a) Check the size and condition of all 4 tires See: Maintenance/Wheels and Tires/Testing and Inspection/Component Tests and General
No comments:
Post a Comment