2010 Lexus Truck RX 350 AWD V6-3.5L (2GR-FE) B CODE Page 92

The waveform is similar to that shown in the illustration.

HINT

When the system is functioning normally, one wheel revolution generates 4 pulses. As the vehicle speed increases, the width

indicated by (A) in the illustration narrows.

Text in Illustration

NG -- GO TO METER / GAUGE SYSTEM See: Instrument Panel, Gauges and Warning Indicators/Testing and

Inspection/Component Tests and General Diagnostics/Speed Signal Circuit

OK -- Continue to next step.

3. CHECK HARNESS AND CONNECTOR

(a) Disconnect the G4 display and navigation module display connector.

(b) Disconnect the F15 combination meter assembly connector.

(c) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Text in Illustration

NG -- CHECK HARNESS AND CONNECTOR (DISPLAY AND NAVIGATION MODULE DISPLAY - JUNCTION

CONNECTOR)

OK -- REPLACE DISPLAY AND NAVIGATION MODULE DISPLAY See: Accessories and Optional Equipment/Navigation

System/Service and Repair/Navigation Receiver (for HDD)/Removal

4. CHECK HARNESS AND CONNECTOR (DISPLAY AND NAVIGATION MODULE DISPLAY - JUNCTION CONNECTOR)

(a) Disconnect the G4 display and navigation module display connector.

(b) Disconnect the F93 junction block connector.