2010 Lexus Truck RX 350 AWD V6-3.5L (2GR-FE) B CODE Page 2285

(c) Reconnect the front seat outer belt assembly RH connector.

NG -- REPLACE FRONT SEAT OUTER BELT ASSEMBLY RH See: Restraints and Safety Systems/Seat Belt Systems/Seat

Belt/Service and Repair/Removal and Replacement/Front Seat Outer Belt Assembly/Removal

OK -- Continue to next step.

2. CHECK HARNESS AND CONNECTOR (FRONT SEAT OUTER BELT ASSEMBLY RH - SEAT BELT CONTROL ECU)

(a) Disconnect the cable from the negative (-) battery terminal.

CAUTION:

Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

(b) Disconnect the front seat outer belt assembly RH connector.

(c) Disconnect the seat belt control ECU connector.

(d) Using a service wire, connect MOR+ and MOR- of the connector on the front seat outer belt assembly RH.

NOTICE:

Do not forcibly insert the service wire into the terminals of the connector.

(e) Measure the resistance according to the value(s) in the table below.

Standard resistance:

Text in Illustration

(f) Reconnect the seat belt control ECU and front seat outer belt assembly RH connectors.

(g) Connect the cable to the negative (-) battery terminal.

NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR (FRONT SEAT OUTER BELT ASSEMBLY RH - SEAT

BELT CONTROL ECU)

OK -- REPLACE SEAT BELT CONTROL ECU