Saturday, March 23, 2019

2010 Lexus Truck RX 350 AWD V6-3.5L (2GR-FE) C CODE Page 312


NG -- REPLACE BRAKE ACTUATOR ASSEMBLY See: Brakes and Traction Control/Antilock Brakes / Traction Control



Systems/Hydraulic Control Assembly - Antilock Brakes/Service and Repair/Removal



OK -- Continue to next step.



7. RECONFIRM DTC



(a) Turn the engine switch off.



(b) Reconnect the speed sensor connectors.



(c) Clear the DTCs See: Brakes and Traction Control/Antilock Brakes / Traction Control Systems/Testing and Inspection/Reading and



Clearing Diagnostic Trouble Codes.



(d) Start the engine.



(e) Drive the vehicle at a speed of 40 km/h (25 mph) or more for at least 60 seconds.



(f) Check if the same DTC is recorded See: Brakes and Traction Control/Antilock Brakes / Traction Control Systems/Testing and



Inspection/Reading and Clearing Diagnostic Trouble Codes.



Result:



C -- CHECK FOR INTERMITTENT PROBLEMS See: Accessories and Optional Equipment/Antitheft and Alarm



Systems/Diagrams/Diagnostic Aids/How To Troubleshoot ECU Controlled Systems/How To Proceed With Troubleshooting



B -- REPLACE REAR SPEED SENSOR AND REAR SPEED SENSOR ROTOR



A -- Continue to next step.



8. REPLACE EACH SPEED SENSOR



(a) Turn the engine switch off.



(b) Replace the front speed sensor or the rear speed sensor See: Brakes and Traction Control/Antilock Brakes / Traction Control



Systems/Wheel Speed Sensor/Service and Repair/Front Speed Sensor/Removal for front, or See: Brakes and Traction



Control/Antilock Brakes / Traction Control Systems/Wheel Speed Sensor/Service and Repair/Rear Speed Sensor/Removal for rear).



NOTICE:



Check the speed sensor signal after replacement See: Brakes and Traction Control/Antilock Brakes / Traction Control



Systems/Testing and Inspection/Initial Inspection and Diagnostic Overview/Test Mode Procedure.



NEXT -- Continue to next step.



9. RECONFIRM DTC



(a) Clear the DTCs See: Brakes and Traction Control/Antilock Brakes / Traction Control Systems/Testing and Inspection/Reading and



Clearing Diagnostic Trouble Codes.



(b) Start the engine.



(c) Drive the vehicle at a speed of 40 km/h (25 mph) or more for at least 60 seconds.



(d) Check if the same DTC is recorded See: Brakes and Traction Control/Antilock Brakes / Traction Control Systems/Testing and



Inspection/Reading and Clearing Diagnostic Trouble Codes.

No comments:

Post a Comment