Standard Voltage:
Text in Illustration
NG -- CHECK HARNESS AND CONNECTOR (A/C AMPLIFIER - A/C PRESSURE SENSOR)
OK -- Continue to next step.
2. CHECK HARNESS AND CONNECTOR (GROUND CIRCUIT)
(a) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Text in Illustration
NG -- CHECK HARNESS AND CONNECTOR (A/C AMPLIFIER - A/C PRESSURE SENSOR)
OK -- Continue to next step.
3. INSPECT A/C PRESSURE SENSOR (SENSOR SIGNAL CIRCUIT)
(a) Reconnect the A/C pressure sensor connector.
(b) Remove the A/C amplifier with the connectors still connected.
(c) Measure the voltage according to the value(s) in the table below.
Standard Voltage:
HINT
If the voltage is not as specified, there may be a malfunction in the A/C amplifier, A/C pressure sensor or wire harness. It is also
No comments:
Post a Comment