2010 Lexus Truck RX 350 AWD V6-3.5L (2GR-FE) B CODE Page 2297

(b) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

(c) Reconnect the front seat belt assembly LH connector.

NG -- REPLACE FRONT SEAT OUTER BELT ASSEMBLY LH See: Restraints and Safety Systems/Seat Belt Systems/Seat

Belt/Service and Repair/Removal and Replacement/Front Seat Outer Belt Assembly/Removal

OK -- Continue to next step.

2. CHECK HARNESS AND CONNECTOR (FRONT SEAT OUTER BELT ASSEMBLY LH - SEAT BELT CONTROL ECU)

(a) Disconnect the cable from the negative (-) battery terminal.

CAUTION:

Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

(b) Disconnect the front seat outer belt assembly LH connector.

(c) Disconnect the seat belt control ECU connector.

(d) Using a service wire, connect MOL+ and MOL- of the connector on the front seat outer belt assembly LH.

NOTICE:

Do not forcibly insert the service wire into the terminals of the connector.

(e) Measure the resistance according to the value(s) in the table below.