Tire Pressure Monitor
HINT
* *: It may take about 2 or 3 minutes until the values are displayed.
* When the "ID Tire Inflation Pressure" data has not changed, reset the tire pressure to the appropriate specified value and
rotate the tire 90 to 270锟斤拷. Then rapidly release the tire pressure and recheck the data.
Result:
B -- REPLACE TIRE PRESSURE WARNING ECU
A -- END
From 08/2009
TIRE PRESSURE MONITORING: TIRE PRESSURE WARNING SYSTEM: C2126/26: Transmitter ID not Received in Main Mode
C2126/26 - Transmitter ID not Received in Main Mode
DESCRIPTION
If the tire pressure warning ECU does not receive radio waves from the transmitters after all IDs are registered, DTC C2126/26 is set in the tire
pressure warning ECU and the tire pressure warning light blinks for 1 minute and then remains on.
When the tire pressure warning ECU successfully receives radio waves from all the transmitters whose IDs are stored in the ECU, DTC C2126/26
will be deleted and the tire pressure warning light will go off.
No comments:
Post a Comment