Be sure to read Description before performing the following procedure.
PROCEDURE
1. CHECK FOR DTC OF OTHER COMPONENTS
(a) Check if the component shown by the sub-code is displayed in the check result of the other components.
(1) Check if "01-DC" is output for the other components.
(2) If "01-DC" is output for any other components, check if the same physical address is displayed.
Result:
HINT
For the list of the components shown by sub-codes, refer to the table in step 2.
B -- CLEAR DTC
A -- Continue to next step.
2. IDENTIFY COMPONENT WHICH HAS STORED THIS CODE
(a) Enter diagnostic mode.
(b) Press preset switch "2" to change the mode to "Detailed Information Mode".
(c) Identify the component which has stored this code.
Component Table
HINT
* "P440" set by the stereo component amplifier assembly is shown in the preceding illustration as an example.
* For details of the DTC display, refer to DTC Check/Clear See: Accessories and Optional Equipment/Radio, Stereo, and
No comments:
Post a Comment