NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- Continue to next step.
4. CHECK HARNESS AND CONNECTOR (MULTIPLEX TILT AND TELESCOPIC ECU - TELESCOPIC MOTOR)
(a) Disconnect the A multiplex tilt and telescopic ECU connector.
(b) Disconnect the B telescopic motor connector.
(c) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Text in Illustration
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- Continue to next step.
5. CHECK TELESCOPIC MOTOR
(a) Apply 12 V battery voltage to the B telescopic motor connector. Then check the steering column telescopic operation.
No comments:
Post a Comment