(1) Disconnect all connectors between the radio receiver assembly and component which has stored this code.
(2) Check for an open or short in the AVC-LAN circuit between the radio receiver assembly and component which has stored this
code.
OK:
There is no open or short circuit.
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- Continue to next step.
7. REPLACE COMPONENT WHICH HAS STORED THIS CODE
(a) Replace the component which has stored this code with a known good one.
NEXT -- Continue to next step.
8. CLEAR DTC
(a) Clear the DTCs See: Accessories and Optional Equipment/Radio, Stereo, and Compact Disc/Testing and Inspection/Reading and
Clearing Diagnostic Trouble Codes/Audio and Visual System (w/o Navigation System).
NEXT -- Continue to next step.
9. RECHECK FOR DTC
(a) Recheck for DTCs and check if the same problem occurs again.
OK:
Malfunction disappears.
NG -- REPLACE RADIO RECEIVER ASSEMBLY See: Accessories and Optional Equipment/Radio, Stereo, and Compact
Disc/Radio/Stereo/Service and Repair/Removal
OK -- END
Up to 08/2009
AUDIO / VIDEO: AUDIO AND VISUAL SYSTEM (w/o Navigation System): 01-D6,01-D7: No Master
01-D7 - Connection Check Error
No comments:
Post a Comment