NEXT -- Continue to next step.
3. CHECK DTC OUTPUT
(a) Clear the DTCs See: Accessories and Optional Equipment/Collision Avoidance and Parking Assist Systems/Testing and
Inspection/Reading and Clearing Diagnostic Trouble Codes/Parking Assist Monitor System.
(b) Check for DTCs See: Accessories and Optional Equipment/Collision Avoidance and Parking Assist Systems/Testing and
Inspection/Reading and Clearing Diagnostic Trouble Codes/Parking Assist Monitor System.
Result:
HINT
- If DTC C1611 is output, perform the procedure to allow the parking assist ECU to store the vehicle information again.
- If DTC C1611 is still output after performing the procedure to make the parking assist ECU store the vehicle information 3
times, replace the parking assist ECU.
- If DTC C1611 is output frequently, replace the parking assist ECU even though the DTC is not output when rechecking for
DTCs.
B -- END
A -- REPLACE PARKING ASSIST ECU See: Accessories and Optional Equipment/Collision Avoidance and Parking Assist
Systems/Parking Assist Control Module/Service and Repair/Parking Assist ECU/Removal
From 08/2009
PARK ASSIST / MONITORING: PARKING ASSIST MONITOR SYSTEM: C1611: ECU Malfunction
C1611 - ECU Malfunction
DESCRIPTION
This DTC is stored if the parking assist ECU judges that there is an internal malfunction as a result of its self check.
HINT
The parking assist ECU stores different types of information during initialization. If the parking assist ECU cannot read the
stored information when it is activated, the parking assist ECU judges that there is an internal malfunction and stores this DTC.
INSPECTION PROCEDURE
NOTICE:
- When "System initializing" is displayed on the multi-display after the battery terminal disconnected, correct the steering angle
neutral point See: Accessories and Optional Equipment/Collision Avoidance and Parking Assist Systems/Testing and
Inspection/Programming and Relearning/Parking Assist Monitor System/Initialization.
- Depending on the parts that are replaced or operations that are performed during vehicle inspection or maintenance,
calibration of other systems as well as the parking assist monitor system may be needed See: Accessories and Optional
Equipment/Collision Avoidance and Parking Assist Systems/Testing and Inspection/Programming and Relearning/Parking
Assist Monitor System/Calibration.
No comments:
Post a Comment