B -- END (AIR MIX CONTROL SERVO MOTOR WAS DEFECTIVE)
A -- Continue to next step.
1. INSPECT AIR CONDITIONING HARNESS
(a) Replace the air conditioning harness See: Heating and Air Conditioning/Housing Assembly HVAC/Service and
Repair/Overhaul/Disassembly.
HINT
Since the air conditioning harness cannot be inspected while it is removed from the vehicle, replace the air conditioning harness
with a new or a known good one and check that the condition returns to normal.
(b) Check for the DTC.
Result:
B -- END (AIR CONDITIONING HARNESS WAS DEFECTIVE)
A -- REPLACE A/C AMPLIFIER
From 08/2009
HEATING / AIR CONDITIONING: AIR CONDITIONING SYSTEM: B1441/41: Air Mix Damper Control Servo Motor Circuit
(Passenger Side)
B1441/41 - Air Mix Damper Control Servo Motor Circuit (Passenger Side)
DESCRIPTION
The air mix control servo motor sends pulse signals to indicate the damper position to the A/C amplifier. The A/C amplifier activates the motor
(normal or reverse) based on these signals to move the air mix damper (front passenger side) to any position. As a result, the amount of air passing
through the heater core after passing through the evaporator is adjusted, and the temperature of the air blowing toward the passenger side is
controlled.
The A/C amplifier communicates with the servo through a communication/driver IC and wiring assembly called the air conditioning harness.
HINT
Confirm that no mechanical problem is present because this DTC can be output when either a damper link or the damper is
No comments:
Post a Comment