(a) Referring to the following AVC-LAN wiring diagram, check the AVC-LAN circuit between the radio receiver assembly and
component which has stored this code.
(1) Disconnect all connectors between the radio receiver assembly and component which has stored this code.
(2) Check for an open or short in the AVC-LAN circuit between the radio receiver assembly and component which has stored this
code.
OK:
There is no open or short circuit.
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- Continue to next step.
6. REPLACE RADIO RECEIVER ASSEMBLY
(a) Replace the radio receiver assembly with a known good one.
NEXT -- Continue to next step.
1. CLEAR DTC
(a) Clear the DTCs See: Accessories and Optional Equipment/Radio, Stereo, and Compact Disc/Testing and Inspection/Reading and
Clearing Diagnostic Trouble Codes/Audio and Visual System (w/o Navigation System).
NEXT -- Continue to next step.
2. RECHECK FOR DTC
(a) Recheck for DTCs and check if the same problem occurs again.
OK:
Malfunction disappears.
NG -- REPLACE COMPONENT WHICH HAS STORED THIS CODE
OK -- END
From 08/2009
AUDIO / VIDEO: AUDIO AND VISUAL SYSTEM (w/o Navigation System): 01-DF: Master Error
No comments:
Post a Comment