Text in Illustration
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- Continue to next step.
2. CHECK OUTER REAR VIEW MIRROR ASSEMBLY RH (SCB+, SGND) See: C1683
NG -- REPLACE PARKING ASSIST ECU See: Accessories and Optional Equipment/Collision Avoidance and Parking Assist
Systems/Parking Assist Control Module/Service and Repair/Parking Assist ECU/Removal
OK -- Continue to next step.
3. REPLACE SIDE TELEVISION CAMERA ASSEMBLY
(a) Replace the side television camera assembly with a new or normally functioning one See: Accessories and Optional
Equipment/Camera/Forward Looking Camera/Service and Repair/Removal.
NEXT -- Continue to next step.
4. CHECK DTC OUTPUT
(a) Clear the DTCs See: Accessories and Optional Equipment/Collision Avoidance and Parking Assist Systems/Testing and
Inspection/Reading and Clearing Diagnostic Trouble Codes/Side Monitor System (w/ Parking Assist Monitor System).
(b) Check for DTCs See: Accessories and Optional Equipment/Collision Avoidance and Parking Assist Systems/Testing and
Inspection/Reading and Clearing Diagnostic Trouble Codes/Side Monitor System (w/ Parking Assist Monitor System).
Result:
B -- END
A -- REPLACE OUTER REAR VIEW MIRROR ASSEMBLY RH See: Body and Frame/Mirrors/Service and Repair/Removal
and Replacement/Outer Rear View Mirror/Removal
Up to 08/2009
SUSPENSION CONTROL: AIR SUSPENSION SYSTEM: C1711-C1714: Front Height Control Sensor RH Circuit Malfunction
DESCRIPTION
The height control sensor changes its resistance value based on changes in vehicle height. The suspension control ECU outputs a fixed voltage of 5
V to the height control sensor's SHB terminal. If the sensor's resistance value changes, the sensor's voltage value changes accordingly. The
suspension control ECU then inputs the voltage value from the sensor to detect the vehicle height change.
No comments:
Post a Comment