Text in Illustration
NG -- REPLACE FRONT SEAT WIRE RH
OK -- Continue to next step.
5. CHECK FRONT SEAT WIRE RH (SHORT TO GROUND)
(a) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Text in Illustration
NG -- REPLACE FRONT SEAT WIRE RH
OK -- Continue to next step.
6. CHECK DTC
(a) Connect the connectors to the occupant classification ECU and front seat inner belt assembly RH.
(b) Connect the cable to the negative (-) battery terminal.
(c) Turn the engine switch on (IG).
(d) Clear the DTCs stored in the occupant classification ECU See: Restraints and Safety Systems/Testing and Inspection/Reading and
Clearing Diagnostic Trouble Codes.
No comments:
Post a Comment