B -- REPLACE TIRE PRESSURE WARNING ECU
A -- END
Up to 08/2009
SUPPLEMENTAL RESTRAINT SYSTEMS: AIRBAG SYSTEM: B1000/31: Center Airbag Sensor Assembly Malfunction
B1000/31 - Center Airbag Sensor Assembly Malfunction
DESCRIPTION
The center airbag sensor assembly consists of the G sensor, safing sensor, drive circuit, diagnosis circuit, ignition control, etc.
If the center airbag sensor assembly receives signals from the deceleration sensor, it determines whether the airbag squib and pretensioner squib
should be activated.
DTC B1000/31 is recorded when a malfunction is detected in the center airbag sensor assembly.
INSPECTION PROCEDURE
HINT
When a trouble code is displayed simultaneously with B1000/31, repair the malfunction indicated by this code (except B1000/31)
first.
PROCEDURE
1. CHECK CENTER AIRBAG SENSOR ASSEMBLY
(a) Turn the engine switch on (IG), and wait for at least 60 seconds.
(b) Clear the DTCs stored in the memory See: Restraints and Safety Systems/Air Bag Systems/Testing and Inspection/Reading and
Clearing Diagnostic Trouble Codes/DTC Check / Clear.
(c) Turn the engine switch off.
(d) Turn the engine switch on (IG), and wait for at least 60 seconds.
(e) Check for DTCs See: Restraints and Safety Systems/Air Bag Systems/Testing and Inspection/Reading and Clearing Diagnostic
Trouble Codes/DTC Check / Clear.
OK:
DTC B1000/31 is not output.
NG -- REPLACE CENTER AIRBAG SENSOR ASSEMBLY See: Relays and Modules/Relays and Modules - Restraints and
Safety Systems/Air Bag Control Module/Service and Repair/Removal
OK -- USE SIMULATION METHOD TO CHECK See: Accessories and Optional Equipment/Antitheft and Alarm
Systems/Diagrams/Diagnostic Aids/How To Troubleshoot ECU Controlled Systems/How To Proceed With Troubleshooting
From 08/2009
SUPPLEMENTAL RESTRAINT SYSTEMS: AIRBAG SYSTEM: B1000/31: Center Airbag Sensor Assembly Malfunction
B1000/31 - Center Airbag Sensor Assembly Malfunction
DESCRIPTION
The center airbag sensor assembly consists of the G sensor, safing sensor, drive circuit, diagnosis circuit, ignition control, etc.
If the center airbag sensor assembly receives signals from the deceleration sensor, it determines whether the airbag squib and pretensioner squib
No comments:
Post a Comment